A family of low-cost, reusable strain relief cable fittings for high capacity assemblies where power has to be fed into an enclosure through a bulkhead or wall.
The Z-Series is for use in appliances, controls, instruments and other equipment designed for North America and /or international markets where UL, VDE, KEMA and SEMKO standards are accepted.
Ship your product with the Z-Series Strain Relief Fitting pre-installed. The cord or cable can be attached later in the country of destination with a power cord of choice specific to the destination's country requirements. Don't worry about ever changing requirements in the destination countries. Your distributor or customer abroad can take care of this for you.
---> click here to view our full line of strain relief devices (pdf) <---
Z-Series strain reliefs together with HSU's own 950 40 Series terminal blocks rated at 30A/600V/AWG 10-18 provide a complete power entry solution for markets where UL, CSA, VDE, KEMA and SEMKO standards are accepted.
All dimensions in mm
Type | Clamping Range |
Panel Thickness |
knock-out | Series Z dimensions (w/o pig tail) | ||||||
---|---|---|---|---|---|---|---|---|---|---|
A | B | C | A | B | C | Sw | HSU P/N | |||
Z 6 | 4 - 6 | 0.8 - 1.5 1.5 - 2.5 2.5 - 3.5 |
6.0 6.0 6.0 |
9.0 9.0 9.0 |
19.0 19.0 19.0 |
12.0 12.0 12.0 |
10.0 10.0 10.0 |
26.5 26.5 26.5 |
17.0 17.0 17.0 |
964 160 670 964 162 670 964 164 670 |
Z 8.5 | 6 - 8.5 | 0.8 - 1.5 1.5 - 2.5 2.5 - 3.5 |
6.0 6.0 6.0 |
9.0 9.0 9.0 |
19.0 19.0 19.0 |
12.0 12.0 12.0 |
10.0 10.0 10.0 |
26.5 26.5 26.5 |
17.0 17.0 17.0 |
964 090 670 964 091 670 964 092 670 |
Z 10.5 | 7 - 10.5 | 0.8 - 1.8 | 4.2 | 12.5 | 22.0 | 13.0 | 11.0 | 36.0 | 17.0 | 964 115 670 |
Z 12.5 | 7 - 12.5 | 0.8 - 1.5 1.5 - 2.5 2.5 - 3.5 |
6.0 6.0 6.0 |
13.5 13.5 13.5 |
26.0 26.0 26.0 |
13.0 13.0 13.0 |
12.0 12.0 12.0 |
34.0 34.0 34.0 |
22.0 22.0 22.0 |
964 130 670 964 131 670 964 132 670 |
knock-out dimensions
Series Z dimensions
A, B, C
A,
B, C, Sw (wrenching flats)
All dimensions in mm
Type | Clamping Range |
Panel Thickness |
knock-out | Series Z dimensions (with pig tail) | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|
A | B | C | A | B | C | D | Sw | HSU P/N | |||
Z 6 | 4 - 6 | 0.8 - 1.5 1.5 - 2.5 2.5 - 3.5 |
6.0 6.0 6.0 |
9.0 9.0 9.0 |
19.0 19.0 19.0 |
12.0 12.0 12.0 |
10.0 10.0 10.0 |
26.5 26.5 26.5 |
58 58 58 |
17.0 17.0 17.0 |
964 161 670 964 163 670 964 165 670 |
Z 8.5 | 6 - 8.5 | 0.8 - 1.5 1.5 - 2.5 2.5 - 3.5 |
6.0 6.0 6.0 |
9.0 9.0 9.0 |
19.0 19.0 19.0 |
12.0 12.0 12.0 |
10.0 10.0 10.0 |
26.5 26.5 26.5 |
58 58 58 |
17.0 17.0 17.0 |
964 095 670 964 096 670 964 097 670 |
Z 12.5 | 7 - 12.5 | 0.8 - 1.5 1.5 - 2.5 2.5 - 3.5 |
6.0 6.0 6.0 |
13.5 13.5 13.5 |
26.0 26.0 26.0 |
13.0 13.0 13.0 |
12.0 12.0 12.0 |
34.0 34.0 34.0 |
59 59 59 |
22.0 22.0 22.0 |
964 135 670 964 136 670 964 137 670 |
knock-out dimensions
Series Z dimensions
A, B, C
A, B, C, D,
Sw (wrenching flats)
<